Como puedo cambiar la region de mi DVD?
Hola tengo un DVD de la marca Samsung modelo DVD-S223 y es region 4. Hay alguna manera de convertirlo a multiregion?
Gracias.
Gracias.
1 respuesta
Respuesta de solobrio
1
Ahi va, esta en ingles, no obstante espero que te sirva.
We take no responsibility for damages caused by following these instructions.
Bear with me, this hack does take a little more effort than normal, but it does work and your player should be fully multiregion at the end...
1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen.
2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English.
3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence:
REPEAT, 5, 7, 5, 3, 8
Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.)
4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region.
5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.)
6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.
You should now be able to play discs from any region. Thanks to Zaffe for posting this infromation and Gianluca for reminding me!
We take no responsibility for damages caused by following these instructions.
We take no responsibility for damages caused by following these instructions.
Bear with me, this hack does take a little more effort than normal, but it does work and your player should be fully multiregion at the end...
1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen.
2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English.
3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence:
REPEAT, 5, 7, 5, 3, 8
Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.)
4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region.
5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.)
6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.
You should now be able to play discs from any region. Thanks to Zaffe for posting this infromation and Gianluca for reminding me!
We take no responsibility for damages caused by following these instructions.
