Mscomm de Visual Basic
Hola a todos, soy nueva programando con visual Basic y debo hacer un proyecto para enviar información a un microcontrolador, por lo que necesito saber sobre el controlador mscomm. Quien me puede ayudar ?
1 respuesta
Respuesta de edvanhalen
1
Te envio un código del MSDN sobre el Mscomm, además de eso tiene un evento OnComm que se dispara cuando hay error, o alguna propiedad se ha cambiado:
Private Sub Form_Load ()
' Buffer to hold input string
Dim Instring As String
' Use COM1.
MSComm1.CommPort = 1
' 9600 baud, no parity, 8 data, and 1 stop bit.
MSComm1.Settings = "9600,N,8,1"
' Tell the control to read entire buffer when Input
' is used.
MSComm1.InputLen = 0
' Open the port.
MSComm1.PortOpen = True
' Send the attention command to the modem.
MSComm1.Output = "ATV1Q0" & Chr$(13) ' Ensure that
' the modem responds with "OK".
' Wait for data to come back to the serial port.
Do
DoEvents
Buffer$ = Buffer$ & MSComm1.Input
Loop Until InStr(Buffer$, "OK" & vbCRLF)
' Read the "OK" response data in the serial port.
' Close the serial port.
MSComm1.PortOpen = False
End Sub
Private Sub Form_Load ()
' Buffer to hold input string
Dim Instring As String
' Use COM1.
MSComm1.CommPort = 1
' 9600 baud, no parity, 8 data, and 1 stop bit.
MSComm1.Settings = "9600,N,8,1"
' Tell the control to read entire buffer when Input
' is used.
MSComm1.InputLen = 0
' Open the port.
MSComm1.PortOpen = True
' Send the attention command to the modem.
MSComm1.Output = "ATV1Q0" & Chr$(13) ' Ensure that
' the modem responds with "OK".
' Wait for data to come back to the serial port.
Do
DoEvents
Buffer$ = Buffer$ & MSComm1.Input
Loop Until InStr(Buffer$, "OK" & vbCRLF)
' Read the "OK" response data in the serial port.
' Close the serial port.
MSComm1.PortOpen = False
End Sub
