Manual de planta telefónica panasonic KX T123210D

Necesito un manual para programar una planta telefónica KX T123210D para restringir llamadas larga distancia de algunas extenciones.
Gracias por la ayuda que me puedan facilitar.
Fabio

1 respuesta

1
Respuesta de
Estimado, te paso los codigos de programacion de esta central.
Suerte¡¡
Move switch on left side of cabinet to PROGRAM. Use main phone to program. (Return to middle position when done)
Code Description (Default)
00 Time/Date
01 System Speed Dial (00 to 99)
02 Extension Number Assignment (01=101 etc.)
03 Operator Assignment (Operator 1 and Operator 2)
04 Paired Telephone DSS Console Assignment
05 Automatic CO Transfer using DSS key (With/Without Transfer)
06 Day/Night Service (Manual/Automatic)
07 System Starting Time for Day/Night service (9:00 AM to 5:00 PM)
08 Call Hunting Setting (Group 1 through Group 8)
09 Hunting Type (Terminate/Circular)
12 Toll Restriction-System Speed Dialing (Class 1, 2, 3, 4, 5)
13 Toll Restriction-Class 2 Denied Code Assignment
14 Toll Restriction-Class 3 Denied Code Assignment
15 Toll Restriction-Class 4 Denied Code Assignment
16 Toll Restriction-Class 5 Denied Code Assignment
17 Toll Restriction-Denied Code Assignment
18 Hold Recall Time set (.5 Min./1 Min./1.5 min./2 Min./Disable)
19 Transfer Recall Time (30 Seconds/2 Minutes(
20 Call Forwarding Start time (1,2,3,4 rings delay)
21 Pickup Dial Delay Time (1, 2, 3, 4 Seconds)
22 CO to CO Duration Time Limit 1 to 32 Minutes
23 SMDR
RS232
Parameters CR+LF, CR
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600
Word Length 7 Bits, 8 Bits
Parity None, Mark, Space, Even, Odd
Stop Bit Length 1 Bit, 2 Bits
24 SMDR Parameters (Lines per page 66) (Skipping lines 0)
25 Incoming/Outgoing Selection for printing
26 Secret Speed Dialing/One Touch Dial printing (Printing/No Printing)
27 SMDR System Data Dump
28 Duration Time Count Start Mode (5, 10, 15 Seconds after dial)
29 External Paging Access Tone (Enable/Disable)
31 DISA (Enable/Disable)
32 OPX (Enable/Disable)
33 OHCA (Enable/Disable)
34 System Working Report
40 CO Connection (Connect/Not Connect Lines 1 through 12)
41 DTMF/Pulse/Call Blocking
42 Pulse Speed Selection
43 Host PBX Access Codes Assignment
44 Trunk Group Assignment 1-8
45 Outward Dialing, Day (All stations enabled)
46 Outward Dialing, Night (All stations enabled)
47 Ringing, Day (All stations enabled)
48 Ringing, Night (All stations enabled)
49 Ring Delay, Day (1, 2, 3, 4, Immediate Rings)
50 Ring Delay, Night (1, 2, 3, 4, Immediate Rings)
51 CO Mode, Day (Normal, DIL, DISA)
52 CO Mode, Night (Normal, DIL, DISA)
53 Pause Time Assignment (1.5, 2.5, 3.5, 4.5 Seconds)
54 Hook Flash time (300ms 600ms 900ms 1200ms)(600ms default)
55 CPC
56 Disconnect Time (1.5, 4.0 Seconds)
57 Auto Designated line access (Enable/Disable)
60 Extension Groups 1 through 8 (Group1)
61 Service Class Assignment of Toll Restriction, Day
62 Service Class Assignment of Toll Restriction, Night
63 Extension Name
64 Account Code Input Mode
65 Call Transfer to Outside line (Enable/Disable)
66 Call Forwarding to Outside Line (Enable/Disable)
67 Executive override (Enable/Disable)
68 DND Override (Enable/Disable)
69 SLT Connection with proprietary telephone (Enable/Disable)
70 Ringing from Door Phone, Day (Enable/Disable)
71 Ringing from Door Phone, Night (Enable/Disable)
72 Assignment of Door Opener, Day (Enable/Disable)
73 Assignment of Door Opener, Night (Enable/Disable)
80 Voice Mail Port assignment (Enable/Disable) (Circle3, Circle B only)
81 DTMF Integration Assignment (Enable/Disable) (Circle3, Circle B only)
91 Call on Hold for SLT (Hold 1=Flash or Hold 2=Flash 20)
99 System Data Clear
Añade un comentario a esta respuesta
Añade tu respuesta
Haz clic para o
Escribe tu mensaje